Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- playground:about:flipper:start [2025/04/17 01:49]
147.135.212.201 alte Version wiederhergestellt (2025/04/05 10:59)
+++ playground:about:flipper:start [2025/04/18 16:32] (aktuell)
195.201.199.99 alte Version wiederhergestellt (2025/04/16 12:31)
@@ Zeile 1: / Zeile 1: @@
-[[li7an3a|Flipper0 Stefan]] {{Li7an3a-backupRelease0.64.4-20240505-150925.tgz}} Kaufzustand
+[[li7an3a|Li7an3a Flipper0 Stefan]] {{Li7an3a-backupRelease0.64.4-20240505-150925.tgz}} Kaufzustand
-[[othiroad|Othiroad Hagen Flipper1]]
+[[othiroad|Othiroad Flipper1 Hagen]]
 [[ixagoodo|Ixagoodo Flipper2]]
-[[l4n0e|L4n0e Flipper3]]
+[[l4n0e|L4n0e Flipper3]] neue FW:{{ :playground:about:flipper:flipperzero-firmware-1.2.0.tar.gz |}} 1.0.1-Datenbackup: {{ :playground:about:flipper:l4n0e-backup-20250206-115020.tgz |}}
+<note warning>
+FW update 1.1.2
+!!! Warning !!!
+Downgrade from this firmware is highly not recommended:
+New power subsystem initialization routine changes the way we work with the battery gauge. Older firmwares will be unable to show battery status. Workaround: reset gauge(by disconnecting battery or use gauge tool).
+New clock and alarm requires new RTC initialization flow. Older firmwares will be unable to properly handle alarm. Workaround: disable alarm before downgrade.
+</note>
+===== Web Links =====
+https://docs.flipper.net/basics/firmware-update/firmware-recovery
 ----
+**Flipper App Site**: https://lab.flipper.net/apps
+existierende FirmeWare alternativen: \\
+https://github.com/FlipperZX/awesome-fucking-flipperzero/blob/main/Firmwares.md
+Zusammenfassende Links in dieser README \\
+https://github.com/DarkFlippers/unleashed-firmware#project-structure
+===== SDK Installation =====
+|''curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py'' ||
+^ Linux & macOS ^ Windows ^
+|''python3 get-pip.py'' |''py get-pip.py'' |
+|''python -m venv venv'' |''py -m venv c:\path\to\directory'' |
+|''source /path/to/venv/bin/activate'' |''pathtovenvScriptsactivate.bat'' |
+|''python3 -m pip install ufbt'' |''py -m pip install ufbt'' |
+|''ufbt -h'' ||
+|''python3 -m pip install --upgrade ufbt'' |''py -m pip install --upgrade ufbt'' |
+  (venv) spiral@intrepid:~/Flippers$ ufbt -h
+:04:03.395 [I] Deploying SDK for f7
+:04:03.395 [I] Fetching version info for UpdateChannel.RELEASE from https://update.flipperzero.one/firmware/directory.json ...
+[[ufbthelp]]
 python neu auf ein Windowsrechner bringen [[..:pyenv-win]]
 ----
-====== Automatisierung der Erstellung und Veröffentlichung von Anwendung mithilfe von GitHub-Workflows ======
+===== Automatisierung der Erstellung und Veröffentlichung von Anwendung mithilfe von GitHub-Workflows =====
+{{ :playground:about:flipper:flipperzero-pinout.png?direct&400|}}
 uFBT https://pypi.org/project/ufbt **ist nicht** fbt https://github.com/flipperdevices/flipperzero-firmware
@@ Zeile 19: / Zeile 55: @@
 C:\01_Installation\12_qFlipper\flipperzero-ufbt\meineAnwendung> [[uftb-h]]
-https://lab.flipper.net/apps
-Zusammenfassende Links in dieser README https://github.com/DarkFlippers/unleashed-firmware#project-structure
-existierende FirmeWare alternativen: https://github.com/FlipperZX/awesome-fucking-flipperzero/blob/main/Firmwares.md
   ufbt update -t f7 -l ..\..\flipperzero-firmware-0.102.3.zip
+  * [[toolwiederstand|Resistanc calculator]]
+  * [[toolzeitzeichen|DCF77 Clock Spoof]]
+  * [[subghzpogsag|POCSAG Pager]]
+  * [[gamefunkssp|Rock Paper Scissors]] Host 433.07 - 434.77 868.35
+  * [[selbsterstelltnewapp|neue Anwendung]]
+  * [[gpiotasten|FlipBoard Signal]]
 ===== Tech specs =====
 https://flipperzero.one/#Tech%20specs
@@ Zeile 65: / Zeile 101: @@
   - <4€
-  - ESP32-Wroom 32
+  - ESP-WROOM-32 dev board v1
+  - Chip Xtensa® Dual-Core 32-bit LX6
   - Clock frequency range 80 MHz / 240MHz
-  - RAM 512kb
+  - 48 GPIO pins in total, only 25 are out to pin headers
-  - External flash memory 4MB
+  - 520kB internal SRAM (there’s also 448 KB of ROM, 520 KB of SRAM)
+  - 4MB external flash memory
   - Power supply voltage (USB) mini or type usbC 5V
   - Required operating current 	Min. 500mA
   - Input/output voltage 3.3V I/o pins 	34 Interfaces 	SPI, I2C, I2S, Can, Uart
-  - Wi-fi protocols 	802.11 b/g/n (802.11n up to 150 Mbps)
+  - Wi-fi transceiver HT40 protocols 802.11 b/g/n (802.11n up to 150 Mbps)
-  - Wi-Fi frequency 	2.4 GHz - 2.5 GHz
+  - Wi-Fi frequency 2.4 GHz - 2.5 GHz
-  - Bluetooth 	V4.2 - BLE and Classic Bluetooth
+  - Bluetooth V4.2 - BLE and Classic Bluetooth
+  - 2.2V to 3.6V board includes an LDO voltage regulator to keep the voltage stable at 3.3V
+  - can reliably provide up to 600 mA | 5 µA during Sleep Mode | 250mA during RF transmissions
   - 6-8€
 </note>
 https://flipperzero.one/#Tech%20specs (fast ende der Seite)
@@ Zeile 148: / Zeile 187: @@
 Sie können auf alle Funktionen des Raspberry Pi Pico zugreifen und auch den Gyroskop-Sensor über den GPIO ansteuern.
-{{ :playground:about:flipper:flipperzero-pinout.png?direct&600 |}}
 [[mh-z19b|MH-Z19B NDIR CO2-Modul]]
@@ Zeile 163: / Zeile 200: @@
 https://crates.io/crates/esp32s3
+https://www.youtube.com/watch?v=tx_ynPOQF4w&list=PL0U7YUX2VnBFbwTi96wUB1nZzPVN3HzgS&index=2

öffentliche Büro Dateien IT-Beratung & Service S.G.

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Unterschiede

Seiten-Werkzeuge

öffentliche Büro Dateien
IT-Beratung & Service S.G.